• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1997 GTX water regulator hose mounting

Status
Not open for further replies.

clegg

Member
I removed the two hose that attach to the water reg valve. Does the hose that goes to the engine inlet with the t go to the top or bottom fitting of the reg? Thanks

I usually take pics but did not this time.
 
On the 98 & 99 The hose from top of cylinders goes from the T to bottom of pressure regulator valve.
 
Ironically, I am working on this piece, here is a pic. The yellow hose(on bottom) goes to the t fitting, the other hose goes to the head pipe. I have a 98 GTX LTD .
pressure reg.jpg
 
There's molded arrows on the hose nipples. The "In" arrow hose goes to pump (visible in Grim's pic, the 'lower' nipple), the "Out" arrow goes to exhaust pipe.
 
Status
Not open for further replies.
Back
Top