1996 gsx - no fuel when selector is in position on but works on res

[Courvin]

Hi,

Here's my story I have a 1996 gsx, had the famous clogged filters in carbs due to the grey fuel lines... I have now, changed all the fuel lines, cleaned fuel selector valve and both carbs, (weird thing I noticed the tinny filter in the rearmost carb was heavily clogged but the one from the other carb wasn't nearly as bad)... Anyhow, my problem now is that I don't get fuel when the selector is ON but I get fuel when it is on RES... Could anybody help me out with this ? I am not sure what I should be doing next.

Thanks

Nicolas

 

[El Toro 33809]

Welcome to the forum Nicolas. Sound like you got the fuel lines crossed when replacing them. Check the fuel selector and fuel baffle for proper line placement. Post any follow up questions in the 2-stroke PWC section of the forum. Good luck.

 

[Coastiejoe]

Crossed lines or defective valve.

 

[Courvin]

thansk... lines were crossed, my bad... posted in other thread ;http://www.seadooforum.com/showthre...ht=996+gsx+-+fuel+selector+position+works+res