Stlouisramsfan
New Member
Hi everyone, great forum here.
So we picked up a speedster that supposed to run great, but doesn't. We were able to test compression while the lanyard key worked on a couple intervals. Now nothing. Unplugged the connector to the post. Checked continuity between the black wire and the black/yellow. At first it was jumping around from 350 to 700 ohms. The best I seen was 200 for an instant. Now it's infinity. The key feels hokey, like loose on it. Thinking the reed switch inside is changing state by the magnet.... Any help is appreciated. I was a Yamaha Waverunner guy for a few years, so please bare with my ignorance on these machines.
So we picked up a speedster that supposed to run great, but doesn't. We were able to test compression while the lanyard key worked on a couple intervals. Now nothing. Unplugged the connector to the post. Checked continuity between the black wire and the black/yellow. At first it was jumping around from 350 to 700 ohms. The best I seen was 200 for an instant. Now it's infinity. The key feels hokey, like loose on it. Thinking the reed switch inside is changing state by the magnet.... Any help is appreciated. I was a Yamaha Waverunner guy for a few years, so please bare with my ignorance on these machines.