08 C180 Speedo?

[Teddyf1]

Hey All,

I'm hoping someone can answer this one for me. I removed my gauge panel to upgrade the Jensen remote to the one with the LED display. After removing the panel I noticed on the back of the main gauge there is a pickup tube for the speedo. I searched but couldn't find an air tube in the bundle. I started the motor and speedo went though its check. Is the panel all electric or is there a tube somewhere I need to find?

Thanks

Teddy

 

[kustomkarl]

There is no air tube to the spedo. The spedo gets it's signal from the spedo sensor wheel at the rear of the seadoo that is electrical. It gets it power in the way of resistance of revolutions of the small wheel as the water passes over it.

Karl

 

[Teddyf1]

There is no air tube to the spedo. The spedo gets it's signal from the spedo sensor wheel at the rear of the seadoo that is electrical. It gets it power in the way of resistance of revolutions of the small wheel as the water passes over it.

Karl

Thanks Karl, I appreciate the prompt response!

Teddy

 

[kustomkarl]

No problem. Let us know if we can help in the future.

Karl