pump

I'm changing the oil in the pump I just put in my ski. Can I use any type of loctite on the plug in the nose cone or do I need a specific kind? Also, I removed and polished/painted my intake grate, and I noticed there was some sort of sealant applied before. Does anyone know what this...

I was wondering if anybody has used SBT pump bearings, any problems with them. I have read that SBT wear rings are garbage. any imput would be very helpful. i was going to order this kit http://www.shopsbt.com/sea-1997-spx/72-105.html

I need to replace my old impeller which was siezed and had to be torched out. See my other threads I also need the impeller shaft and housing. I have the cone reservoir and HAD the bearings until the package was stolen from my doorstep.... Thanks for your help!! :seeya:

I have a 97 or 98 Xp limited 951 pump. Has good oiled bearings. impeller spins freely, all it needs is a new wear ring.then its good to go! This is all factory parts. I m asking $135 shipped or make a reasonable offer Send me a Pm or contact me 228-217-5078...

I have a 2002 Utopia 205. It has the Mercury 240 EFI. The last two times I took it out, after we stopped in the lake, it would not start. After a while it finally would though. The last time I took it out, I docked it and left it running, backed the trailer in, and when I was talking back...

can anyone help me ive got a 2001 gti and im having trouble setting up the oil injection pump. I have just rebuilt the engine but i am stuck on how to setup the oil injection pump and the position of the thin metal plate that spins between the pump and the block please help!!thanks

Hello everyone. I hoping someone can give me some advice. The wear rings in my '04 200 speedster need to be replaced but some previous owner/mechanic got cute and put non-stock parts on the boat. :rolleyes: The pump housings currently on the boat are BRP pt# 271 001 258, which I believe are...

:confused:Not New problem, as I see after I have searched the www as well as here, for answer or pictures - because looking at Manuals and Parts drawings as well as pictures found on the www related to 1991 Seadoo and similar years - nothing found explains to me how the Siphon System Works as...

Have a GTX 4-TEC. Picked up some small rocks yesterday. Pulled the pump to clear them, and the impeller is dinged pretty good. A local mechanic says it could be a big problem, as it may create static electircity, and is recommending sending it out to get machined. Any experience/advice?

Anyone had a leaking stator? You can fix it yourself ! Recently got a m2 jet drive with 250 optimax attached to a 22 foot Polaris Made by BAJA one ton (2050lbs) boat. While catching up service, I found that the drive oil was like tar (pretty nasty) but no water in it. I changed it out with...

Hello all, I just bought a 95 speedster. From a visual inspection looking into the impellers from the grate I can see that the 2 impellers are quite different from each other. One is dull and has very flat blades, it looks like the picture in the shop manual. The other has very curved blades. It...

I have a Sea-Doo engine alignment tool for sale. Complete with all plates and hardware. Like-new condition. - $100 plus shipping If interested, please PM me. Thanks!

Just bought 96 GTS that froze up 4yrs ago. Bearing at back of pump totally locked up and disintegrated. Drive shaft was locked. Shaft will turn now but can't get the pump off or the entire drive shaft off. As far as I can tell from the shop manual I have from my 93 model all the bolts are...

I recently bought a used 99 XP Limited. Upon first ride the PWC is taking on water rather quickly. I checked for any hull leaks and that is not the problem, no water enters the hull when PWC is off and sitting in water. The PWC is taking on water rather quickly at idle and speed. The exhaust...

Hey everyone, I just got back into the Sea-doo world with a 2000 Sea-Doo GTX DI. Here's my strange problem. It's been running fine since the beginning of the season, but last weekend, after putting it in the water and taking it for a good run for a few minutes, I came back to dock and at idle...

I have a 1995 Seadoo GTX. I had the carbs off yesterday and after I put them back on I noticed that the cable that runs from the carbs to the oil pump was not "tight". By "tight" I mean that when the throttle is pulled, the oil pump cable is also pulled, but when the throttle is released the...

Please see my other post regarding my test run results. Long story short, I am getting an intermittant loud/rattle vibration noise in and out of the water while at idle. I removed the pump and changed all the bearings yesterday and the problem is still there. While I had it apart, I...

Hi, The weather was finally nice enough here to get the boat out for a test run since the pump overhaul. FYI- I replaced: -floating ring (plus O-rings) -carbon ring -impeller (Solas 14/22) plus boot -wear ring -neoprene seal -pump shaft seal -pump oil I also resealed the ride...

Hi, I have a universal alignment tool from SBT for sale. Complete in like-new condition. PM me if interested. Thanks!

I am planning on going through the pump of my boat over the weekend. Of those that have experience with it, what are the recommended items to replace and service while in there to seal pump and reduce cavitation? Obviously these: -Impeller -Wear ring -Oil -Pump to hull seal Any...