Search results

My Battery light is on ... Battery is strong and starts ski with no issue .. I tested the voltage to see if the recifier is bad ... 12.4 with engine off ... Started motor .. went to 12.4 .. reved it a bit and it climbed to 12.8 ... ran it for 30- 45 seconds and after voltage was 12.7 .. It...

Mine did the sae three times .. DO NOT OVERTORK!!!!

Can I test the rectifier by testing the battery Voltage when on and off so I do not have to take it to the lake?

I will try to make this short .... one problem after another Originally when I connected the lanyard I got one long continuos beep. I traced this out to the fuel guage sending unit. When disconnected ... everything worked fine. Took to Lake ... ran great except at the end of the day it was...

where in california .. I need a good seadoo mechanic PLEASE?

Any help with this ... I am worried about the very slight buzzing noise causing issues once i replace the gas sending unit.

I disconnected the sending unit only and it did fix the problem, but there is still a very faint buzz from the buzzer when I connect the lanyard that continues while I run it. The battery light remains on when running (as well as the fuel light). With just the fuel sending unit disconected...

How do I fix it? The electronic gas guage was working fine. It read 1/4 tank earlier today ... i filled it up to eliminaye a low fuel problem and now it reads full ????????

update: If I disconnect the gas guage ... I get two beeps and everything seems to work. Do I need a new gas guage or is there a short somewhere maybe.

How do I test that or replace it? do I have to remove the gas oil / tank to get to wear the wire go in the gray box? or can I just splice one in? I took apart the handle bar par to check it out and it looks good .. no corresion or anything. would a bad beeper make the lights for the battery...

I pulled the wire the temp sensor and no change. I tested it for continuity to ground as well and there was none. Gas guage is working fine. I aslo cleaned the post and the lanyard. Both battery light and temp light stay on when running on my guage. It has a brand new battery.

I get a continuous beep from the moment i put the lanyard on. The doo will start and run fine but the continous beep never stops. battery is good Does it with both lanyards tested running voltage ... 13V Gauges work .. but battery light and temp light do not go out full of fuel and oil...