Search results

Alright I will have to suck it up and get it over with. What about when I put the pump back on what kinda sealant should I use?

Hey guys quick question. When reinstalling my motor on my 96xp I didn't put the rubber plug/spacer on the end of the driveshaft on the Pto side. Is there anyway I can get that in there without completely removing the pump. I know this pump will give me a hard time coming off with the amount of...

good luck out there, have fun and be safe. take pics and videos for us along the way!!

i have the same setup as racerxxx works great

i had the same exact issue. replaced the connector and it has been fine after that. i think the connection just gets bad after a while.

how much are u trying to get for the steering setup?

That's great thanks guys. I know it's not a adjust on the fly type of deal but it's better then what I got now Any good ways to remove the vts that's in it now? What about plugging up the hole in the hull.

The trim on my 96xp has never worked and most likely never will. Has any one ever installed a hx trim knob on a x4 hull? The only other thing i could think of is a yamaha twist throttle trim i know that has been done before. Anyone have any other ideas?

not always, too high of a compression can cause detonation. In your case, u just have to burn off some of the extra oil from winterizing

Well this is odd, I just checked again and now they are in stock in the wallmart closest to me so i just ordered it. everyone that couldnt find one should go back and recheck.

Nick is always great to deal with always has those hard to find parts with good pricing and fast shipping. Thanks again Nick :thumbsup:

cant fine any in my area :/ great deal tho

Nice! i live in manorville right next to shirley, but i launch from east moriches where my shop is. This is right by the coast guard station in tuthill cove. Cant wait for the warmer water temps, it has been a long winter.

Got out for the first ride of the season today here on long island.:thumbsup: water temp was around 45* but was able to burn a 1/4 of a tank before getting to cold. The x4 ran real well with the new motor in it. Anyone get out this weekend and ride?

those are great i have never seen them before. just ordered a set

check the carbs and pop off. u compression should be alright at 130.

could just be bad luck. bolts can come lose at any time if there not at the proper torque.

sounds like to me a bolt fell down into the rotary valve i would pull the carbs off and see if the rv plate is moving when you turn the motor over by hand. if it is the rotary valve u might be able to get away with just replacing the brass gear inside the motor. u will still have to pull the...

the box of pistons looks cool, might be worth checking out. its a bit sad to see a business being sold like that

yes lou im kidding around. even tho most of the time it is the sellers honesty we have to worrie about. but if it consistently low u can use it and just add the difference to it. my cousin had a gauge like this, low by 20 psi. on the back of it i just wrote +20psi with a marker so we never be...