1997 GTX carb settings

S

shamrock246

New Member

• Sunday at 8:58 PM

• #1

Doing some research on the ski I ran across the carb settings below which one is correct for the high speed needle setting? Mine are set to MAG 0/ PTO 0.

1997 service manual MAG 0 / PTO 0 turns
1997 specs on seadoo source.com MAG 0 / PTO 1/2 turn
1996 with same engine and carb setup according to seadoo source is MAG 0 / PTO 0

 

mikidymac

Moderator

Staff member

Moderator

• Sunday at 10:07 PM

• #2

PTO cylinder does run a little hotter. No harm in running the rear carb HS open a little.

 

S

shamrock246

New Member

• Yesterday at 6:41 PM

• #3

Thanks I’ll go with a half turn on the PTO needle.