• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

What will replace Loctite 438?

Status
Not open for further replies.
M

mrmustang2021

New Member
On my 20121 Sea Doo GTX 170, I got a stone in my impeller... I have to replace the impeller boot part # 267000206... The Sea Doo service manual states to use Loctite 438 on the impeller boot... I cannot find this Loctite 438 anywhere... Does anyone know what other Loctite can replace this?
THANX
 
The recommended sealant is Loctite 577 , you can get it from the Seadoo dealer part number 293800050. I recommend this sealant, ever since I started using it no more loose boots, also recommend use the factory boot on any brand impeller, they are the best.
 
It is just Superglue with rubber added.
$10 on Amazon from one of the best Cyanoacrylate makers in the country IC-2000
 
I used 410... From Ebay... I found some 438 on Ebay too... Coming from Malaysia... But it will take 6 weeks to get here... And I did order some for next time... If needed...

THANX
 
Digdog said:
The recommended sealant is Loctite 577 , you can get it from the Seadoo dealer part number 293800050. I recommend this sealant, ever since I started using it no more loose boots, also recommend use the factory boot on any brand impeller, they are the best.
Click to expand...
where do you see 577 I have the manual and it is 438 for the boot
 

Attachments

  • loctite 438.png
    loctite 438.png
    77 KB · Views: 4
Status
Not open for further replies.

Similar threads

A
New Stock ECM Installed
Replies
2
Views
159
anthonypborn
A
J
Sounds like cavitation at speeds above 8 mph
Replies
0
Views
168
Johnsonjf
J
rotaxrule1
  • Locked
4tec 215 oil filter retaining nut loctite needed?
Replies
4
Views
803
TomKat 300
T
C
2018 Seadoo GTI 155 Limited Jet Drive Service
Replies
4
Views
295
Ccarlson142
C
GearGal
Pro Tips for Haggling with Dealers at the Boat Show???
Replies
0
Views
161
GearGal
GearGal
Back
Top