IBR sensor issue

[geauxeagles88]

Had anyone else had this issue? Idling is fine. Any throttle at all engages the IBR and it goes into reverse. Dealer thinks it's a sensor. All this fly by wire is cool, but is highly reliant on sensors that seem to not work perfectly.

 

[Coastiejoe]

Did they plug into the system? I have a CanDoo Pro and it tells me everything that the various components and sensors are seeing and or doing.

 

[3ftDeep]

Once in a while my iBR does funky things, but after I turn it off for 15 minutes or so it seems to reset itself. Before spending any $$, try disconnecting the battery just for kicks. Good luck!

 

[geauxeagles88]

Thanks! I'll try it!

 

[ski-d00]

That sounds like a failure of the ibr main board which is common on the 09 and 10s. What year ski?

 

[geauxeagles88]

That sounds like a failure of the ibr main board which is common on the 09 and 10s. What year ski?

2015. It better not be a main board already. Damn.

 

[3ftDeep]

What about your warranty? Lots of machines came with a 3 year warranty. If you're over, it can't be by much so maybe they'll cut you some slack. You shouldn't have this problem so early.

 

[geauxeagles88]

What about your warranty? Lots of machines came with a 3 year warranty. If you're over, it can't be by much so maybe they'll cut you some slack. You shouldn't have this problem so early.

I just bought it as a new leftover 2015 with a2 year warranty. It should be covered, but it seems ridiculous to have to replace that at 10 hours of use.