buccnou
Member
Hi, question for all the 4tec engine rebuilders. So I put everything back together and my timing chain came off so I pull the head and replaced all the valve's. Now when I locked the crank with tool is the piston supposed to be flat or level with the block?
Motor is a 155 RXP 07 but I brought a new block from eBay from an 09 155 GTI and used my old piston and everything. When I lock my crank is not level or flat with block see in picture but I got the mark on crank aligned see in picture.
Any help be nice thank you
Motor is a 155 RXP 07 but I brought a new block from eBay from an 09 155 GTI and used my old piston and everything. When I lock my crank is not level or flat with block see in picture but I got the mark on crank aligned see in picture.
Any help be nice thank you
