X4 superstock part out with pics

[seadoonealdeal]

Built by Terry Baker of Baker Performance
Never raced just built for rec riding


Hull with ownership-$350
Carbon fiber hood--$350
Hot Tach--$330.00
UMI Steering (new style)-$275
Pro Taper bars-$75
UMI Finger throttle--$50
UMI start/stop switch-$25
Baker Hydraulic trim-$275
Novi 44-$675
R&D intake-$110
Jet Dynamics intake grate-$135
Skat track 1 Magnum pump 12 Vien standard_$800 ($1450 new)
Impeller custom cut and bent-$130 (I’ll find out pitch)
MSD water injection-$260
MSD Enhancer-$260
MSD Total loss Anologe-$
R&D nozzle set up-$125
R&D Spec 2 pipe (new chamber)-$525
R&D Trim tabs-$55
Seat with riser and new Jet Trim cover-$425
Odyssey sponsons-110
Drive shaft with through hull bearing-$55
Starter- ½ season-$75
Cover-$60
Stock electrics (flywheel, Mag, cover pick up)-$?
Fully ported and epoxied superstock motor (longblock)- $725
Pump or Race gas head’s available Milled and cut stock or Miller head with 39cc domes-$200(don't have pump gas domes for Miller head)
Tons of miscellaneous parts left..Just ask

 

[K-9Soldier]

Hey, I was wondering can you post a couple pics of the carbon-fiber hood, specifically the the top and bottom, and also a pic of the steering set-up... Thanks

 

[K-9Soldier]

I was also wondering do you still have the speedometer unit that mounts on the back of the ski and how much would you want? Thanks

 

[K-9Soldier]

hey... my e-mail is Ratfink68@comcast.net

 

[Boosted3s]

PM sent on the nozzle and trim tabs.

 

[Boosted3s]

Your pm box is full, I will take the nozzle set. I will send the paypal payment in a few minutes. Thanks!

 

[daverade]

where can i get the dope air intake filters for me carb's on a 1996 GTX??? or can i ?

 

[seadoonealdeal]

X4 part out

Nozzle, Umi Start/stop switch, Baker trim, Total loss ignition and trim tabs sold

 

[seadoonealdeal]

X4 part out

Bump 2 the top

 

[daverade]

i really wanna know... where can i get some of those intake filters...spark arrestors, air filters... whatever you wanna call em...so i can get rid of this big bulky black oval box????

 

[seadoonealdeal]

X4 part out

You can buy after market flame arrestors at any aftermarket part PWC companies. Just make certain you re jet

 

[daverade]

coo thx.....

 

[seadoonealdeal]

X4 part out

Trim tabs, nozzles, Umi start/stop switch, baker trim, total loss...All sold!!!

 

[seadoonealdeal]

X4 part out

Motor with stock electronics SOLD!!

 

[seadoonealdeal]

X4 part out

Bump 2 the top

 

[seadoonealdeal]

X4 part out

Bump to the top

 

[Boosted3s]

Since you wont respond to PM's or emails I will ask you here. I would like to know if the nozzle set shipped and when. Its been 10 days with no word from you!

 

[seadoonealdeal]

X4 part out

Boosted3s.... I did send you and everyone else that has bought parts from me recently that I couldn't get things shipped until this Tuesday because of work commitments. If you want i'll refund your money?

Again guys sorry for the delay!!
Thanks
Neal

 

[Boosted3s]

No, I just wanted to know where they were. if you ship them tomorrow that will be fine.

 

[BOUDHA]

Hello

i'm very interested by your hydrolic trim system
but i'm in France !

can you send it to france ?
how many for the shipping ?

thanks

 

[seadoonealdeal]

X4 part out

To the top

 

[BOUDHA]

have you got a pics of the R&D nozzle set-up ?

 

[seadoonealdeal]

X4 part out

Sorry nozzle sold

 

[seadoonealdeal]

Update on parts list

Built by Terry Baker of Baker Performance
Never raced just built for rec riding


Hull with ownership-$350
Carbon fiber hood--$350
Hot Tach--$330.00---SOLD
UMI Steering (new style)-$275--SOLD
Pro Taper bars-$75---SOLD
UMI Finger throttle--$50---SOLD
UMI start/stop switch-$25---SOLD
Baker Hydraulic trim-$275---SOLD
Novi 44-$675
R&D intake-$110--SOLD
Jet Dynamics intake grate-$135
Skat track 1 Magnum pump 12 Vien standard_$800 ($1450 new)
Impeller custom cut and bent-$130 (16/24)
MSD water injection-$260
MSD Enhancer-$260
MSD Total loss Anologe-$300 ---SOLD
R&D nozzle set up-$125---SOLD
R&D Spec 2 pipe (new chamber)-$525
R&D Trim tabs-$55---SOLD
Seat with riser and new Jet Trim cover-$425
Odyssey sponsons-110
Drive shaft with through hull bearing-$55---SOLD
Starter- ½ season-$75
Cover-$60
Stock electrics (flywheel, Mag, cover pick up)-$?---SOLD
Fully ported and epoxied superstock motor (longblock)- $725---SOLD
Pump or Race gas head’s available Milled and cut stock or Miller head with 39cc domes-$200 MLIIER HEAD SOLD
Tons of miscellaneous parts left..Just ask

 

[seadoonealdeal]

X4 part out

Bump to the top