• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

wrecked a $80,000 car (pics)

Rampage

Premium Member
Premium Member
Just wanted to share. I used to work for a company that built very high performance cars. Long story short..we where on our way to a show with them, and we where going over a bridge and decided to play a little..then the one car had catastrauphic failure in the rear end, and the veh and the owner of the white car lost complete control. I could see nothing but smoke and sparks and debris in front of me. He walked away without a scratch.
I was driving the black one and he was driving the white one. Black Z was around 500hp and his was around 750hp. I never set the time stamp on the camera LOL

31.jpg


32.jpg


33.jpg

34.jpg

35.jpg

36.jpg
 
Last edited by a moderator:
Glad to hear your okay!!

Wow! Wouldn't it be nice if they healed like we do! At least you guys are alright! Are they a total loss?
 
The black one made it through the wreck without a scratch..but the white one was a total loss.
 
That black car is SWEET!!

I am glad you guys are ok. At least it was the owner of the car that destroyed it and not yourself or a fellow employee.
 
That black car is SWEET!!

I am glad you guys are ok. At least it was the owner of the car that destroyed it and not yourself or a fellow employee.


This is my build list from the black Z


Engine Modifications

T04E 60 Trim STS Remote Mount Turbo
STS Intercooler
440cc Nismo Injectors
Walboro Fuel Pump
38mm Tial Wategate
50mm Tial Blow Off Valve
HPC High Performance Coating Inside and Out
STS Dual Stage Boost Controller
Nismo Thermostat
Koyo Polished Radiator

Engine Management

Turbo XS U-Tech System

Wheels & Tires

Foregedline MD3P 19X9.5 (F) & 20 X 10” ( R )
Wrapped in Falken FK452 245/35/19 (F) & 285/30/20 ( R )
Eibach 10mm Pro Spacer ( R )

Brakes

14” Superlight 6 piston Wilwood Brakes (F)
12.9” Dynapro Big Break ( R )

Suspension

(F & R) APEX N1 Dmaper EXV
Nismo Sway bars 36mm Hollow Steel ( R )
22mm Hollow Steel (R)
Kintex Racing (F) A-arms & ( R ) Camber/Traction Arm

Exterior

C West N1 (F&R) Body kit with Canards & Side skirts
KGS Engineering Vizage Type A wing
Blacked out Emblems & Door handles

Interior

Auto Meter Nexus Gauges 52.4mm Boost , Fuel & Air Fuel Gauge (Custom mounted)
Pioneer AVIC - D3, BT, IPOD and remote
55 x 4 Class D Memphis Amp and 500 x 1 Class D Memphis Amp
Memphis 15” Sub (Custom mounted)
Nismo Shift Knob
Two Memphis 6 ¾” and two 6 ½” with tweeter
Katskins Black Leather Seats with Red Trim
 
Id' like to see a dyno sheet of the black car, im not doubting you but without internal engine work i dont see that 60 signel turbo with 440 cc injectors making 600 HP to the wheels, maybe at the crank but id say maybe.. 450 ish?

ive seen stranger things however.
 
Id' like to see a dyno sheet of the black car, im not doubting you but without internal engine work i dont see that 60 signel turbo with 440 cc injectors making 600 HP to the wheels, maybe at the crank but id say maybe.. 450 ish?

ive seen stranger things however.

Oooppss your right I fat fingered that it actual was around 496 at 12psi
the white one was a fully built motor with Twins. Every Dyno reads different, and every person running a dyno comes up with somthing different. To many variables in there...drive train loss I think was set at 10%. Dynomite Dynos are known to read high...put the same car on a Mustang Dyno and you will get much less HP numbers.
 
Thought I'd share this along the same topic....a buddy sent this to me a few days ago and it happened right around the corner. Yikes...
[youtube]8RNbbDRdvBw[/youtube]
 
"Is that your favorite model?" "Come on now, isn't it everyone's favorite model?"
 
Back
Top