Winterize flush

[qcompgreg]

I want to make sure that I am putting in antifreeze for winter storage correctly. I put antifreeze into both ends of the left hose. I take off the hose and the engine and add af. Then I reconnect that end and pull the other end off. I clamp a different hose each time I add af to keep it from just leaking out. Is that correct?

 

[Poormanracing]

You need to block off the clear outlet hose that comes out the bottom of motor.if you ad enough antifreeze to come out the hose on the cyl head your getting it into the motor

 

[POPPS]

I simply turn the motor o a can,,,block off all drain lines and the top exit hose,,,I remove the the highe pisser hose,,,then I have a long,,,12 inch hose that I hold high above the pisser,,,I pour the antifreeze in until it seeps out the pisser fitting,,,,keep track of all the pincers you use down low.