Winch post adjustment ?

[crisp1]

I have a 2017 Sea-Doo GTI paired with a 2012 triton LWTIC single place trailer, when loading my bow seems to come in under the bow roller just slightly and I have to lift the machine just over the top of it, my bunks are spaced at 22 inches apart inside to inside, does anyone have any suggestions as to why my bow seems to come in a little low?? winch post has some adjustment, this is the post setup I have ......

 

[wrench2ride]

your winch post set up looks fine, you may want to try not backing your trailer in as far in the water when you load up, you may have to winch the seadoo up the bunks so the hull reaches the roller on the winch post if you can't float it all the way.

 

[snikwad003]

+1 on too deep. See it all the time at the ramp, people will fight it and fight it.