So was out riding, then i came back into the marina where we have our boat (dock seadoo beside boat) and i always put the trim all the way up when going slowly otherwise the front end goes under a little. anyways, i tryed putting it back down and nothing. Now obviously it could be the fuse, but problem is i cant find it. Is there anywhere i can find schematics of a 1998 xp ltd? for free, i dont feel like buying a manual.:cheers:
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Trim stuck up?
- Thread starter bigwood
- Start date
- Status
Check and make sure the 7.5 amp fuse is blown. Open Front compartment and remove storage basket. On the left side of the ski inside the hull towards the seat there is a small black box, thats the MPEM. On the end of it is a fuse box that will have your fuses in it. Pull them out and make sure none of them are blown. If it's not blown it's your VTS motor, switch or module. There are ways of testing. Check the fuses and see what's up. Then go from there
k sweet ill try that
- Status
