Stator Oil

[buckeye_paul]

I emptied the oil from the stator on the M2 drive. I wanted to know if I should worry much about some streaks of whitish oil. I'm assuming some water got in there but it couldn't have been much. How big of a job is it to replace the seal in there? Are special tools required? Thanks

 

[buckeye_paul]

Update

No one had any advice. I don't think there was much water in the oil I drained but I decided to change the seal for the peace of mind. I fabricated a seal puller. I also found a spacing sleeve that was the perfect size to push the new seal back in evenly. Got everything back together okay. Should be ready for spring.

 

[El Toro 33809]

Sorry no one offered any assistance. Sounds like you have things taken care of. Good luck.