• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Solas Impeller 1997 GTX

Status
Not open for further replies.

etemplet

Moderator
Moderator
Has anyone installed the Solas Concord SD-CD 14/22 on a 96/97 GTX? I have a worn impeller and need to replace. Speed and performance improvements are not the point of this purchase. I'd like the ski to run it it's normal range. Decreased performance in any area over stock is not something I would like to encounter. LOL Input is appreciated.
 
Impros has a chart and Glen formally of skat trak has forgotten more about impeller than any of us will ever know
 
Impros has a chart and Glen formally of skat trak has forgotten more about impeller than any of us will ever know
That's the impeller it calls for 14/22.
CONCORD3 SD-CD-14/22

This impeller is also recommended.
X Prop3 SD-SC-X0(16.5-23.5)
 
I dont doubt the15/23 is the proper impeller which is why I posted here to verify my findings :) I was looking at the standard impeller pitch and not knowing much about impellers seems a bit more agressive to me (17/25). I was hoping someone has a GTX with a Solas installed but I always appreciate any input so thanks.

Impeller Information Impro GTX.png
 
I have a 99 GTX RFI with the Solus 15/23 and it works very well. Although It's an sT-CD 15/23
 
Last edited:
I had trouble reading the number on the Seadoo Impeller. After looking at my picture I see a bit more clearly it is a 271000660 which is stock. Impeller Outside Diameter was pretty good. That impeller is on my wife's ski and I think I'm gonna leave that one alone. My ski probably has the same stock impeller. If I see a Solas for a good price I'm gonna pick one up.
 
Status
Not open for further replies.
Back
Top