• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Seadoo XP High Speed Screew

Status
Not open for further replies.

FatAgnus

New Member
Hello there, this is my first post so i hope im posting in the right topic
Im the proud owner of a 99 XP 951.
Since there seems to be some problem in one of my carbs ive removed them and are in progress of rebuilding them.
When i removed the carbs i noticed that the plastic lid on both of the h-screws are missing!
I know it shold be at 0, but how do i know when the lid is gone?

/Johan
 
Turn them in gently with a screw driver until you feel the "bottom out" or slight resistance. I took my caps off my 01 XP because they would spin on the screw.
 
O or 0
the joys of the European multi languaged Union
England (Chelmsford ) telling Sweden how to !


hey Karl this reminds me of trying to order a McDonalds here in South Florida

Sorry Sir/Madam me no speeke Spanish:reddevil:
 
Last edited by a moderator:
Sorry for the eco guys, ive been reading in the manual and it said that the plastic cap could be turned in either direction for adjustment... so i thougt it sounded strange to have the screw all the way in...
ok enough of this 0=0 :)
Thanks for the help!
 
If you still need help let us know. We would never point you in the wrong direction. We're serious about helping out here, just having some play on words. No insults or criticism is intended. :)

Karl :cheers:
 
Status
Not open for further replies.
Back
Top