• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Sea-doo spark won’t turn on, nothing

Seadoo703

New Member
Hey guys, I bought my sea doo spark brand new 2 months ago. I noticed it said OTAS Failure for a day and went away about a week ago. After I used it this past weekend, I tried to go on the water again and it wouldn’t turn on at all. I’m not sure if it’s related to the OTAS Failure message.
No beep, no click, no power in the dash. I changed the spark plugs, the battery, starter solenoid, relay, all the fuses, even changed switched main eletrical harness with my other working spark. The oil is good, no old gasoline is inside of it, the engine and jet pump isn’t stuck or waterlocked.
The dealer checked it for an hour for diagnostic, saw that the ECU/ECM is fine but would need an additional 4 hours to check for the issue and cannot gurantee that the warranty will cover the cost.
Has anybody had this issue before? I’m not sure what else to do. I appreciate any help or advice
 
Back
Top