Plug question on fuse block rxp 255

[Mojosolid]

Quick question, does anyone know what this plug besides the fuse block is for? There is nothing plugged into it at the moment
I did find a plug with a 6 prong female end and it fits but the receiving end I. The picture only has 2 prongs
Wondering if this why the VTS isn’t working?
Thank you

 

[skiasylum]

Okay, that is the diagnostic plug and I think the other female plug you found is the terminator for the diagnostic plug. The female plug should have no wires and be attached to the battery holder.

 

[Mojosolid]

Okay, that is the diagnostic plug and I think the other female plug you found is the terminator for the diagnostic plug. The female plug should have no wires and be attached to the battery holder.

Thanks but the other plug I found is attached to a wiring harness . I’m trying to track down why the vts isn’t working it may be a bad switch . Hasn’t affected the ride at all but I would like to use it .
Thank you

 

[ski-d00]

Bad vts is usually a bad module or motor and nothing to do with your diag connector. Start at the vts and check for 12v power. If you have 12v there, then put 12v to the motor directly motor to see if it's a bad motor or bad module or both. What typically happens is that people don't replace their VTS rubber boot and it cracks and lets water in to the module and ruins it and/or the motor.

 

[Mojosolid]

Right on will check thank you