-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Please tell me what Spark Plugs I need
- Thread starter markrvp
- Start date
- Status
Here is the plug and the gap needed for the plugs.
NGK BR8ES Gap/ 0.5-0.6mm or .020-.024in
I hope this helps
Karl
NGK BR8ES Gap/ 0.5-0.6mm or .020-.024in
I hope this helps
Karl
Let me ride it?
Yeah, I"ll tell ya what plugs you need...................if you let me ride it! I promise I won't go fast. But you can't put the learning key in because I want to go just 500 rpm faster than that....:rofl:
You'll need NGK DCPR8E and gapped between .028"-.031". And don't take it for granted that when you buy them, they are gapped properly. Any drop or bang from the box and it's changed. I couldn't tell you how many times I've found bad gaps on plugs before installing. So, if you don't have one, spend the extra buck at the cash register and pick up one of those little round ones. It'll do just fine...............:cheers:
Yeah, I"ll tell ya what plugs you need...................if you let me ride it! I promise I won't go fast. But you can't put the learning key in because I want to go just 500 rpm faster than that....:rofl:
You'll need NGK DCPR8E and gapped between .028"-.031". And don't take it for granted that when you buy them, they are gapped properly. Any drop or bang from the box and it's changed. I couldn't tell you how many times I've found bad gaps on plugs before installing. So, if you don't have one, spend the extra buck at the cash register and pick up one of those little round ones. It'll do just fine...............:cheers:
- Status
