i have set the idle speed screw to 1 1/4 turn..but the hight speed screw,is it supose to be real tite(zero)cause on mine there is a plastic stopper...should i cut the stopper on the screw ti close real tite......
i want to know...the accelerator screw,is it supose to be close all the way..cause mine..there a plastic stopper on the screw....or do i need to cut the stopper and scrw all the way...please help me.....
If you decide to remove the cap - you just pull it straight off the screw.
But then set the screw all the way closed (clockwise) and then put the cap back on. Unless you have some fire breathing induction system or cone filters, set the high speed screw to 0.
