-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
P1504
- Thread starter Liga71
- Start date
Hi I'm having the same issue my 2012 Sea-Doo git se 155 has the code P1504. I used to have code p1505 then bought a new TOPS switch, installed it, then P1505 went a way, but now I have P1504. Did you end up finding out how to resolve this issue? please let me know thank you.
Where can I get the Service Manual from? Because I don't know what those circuits, etc is referring to.
What
What ended up being your issue I got the same problem ?
I haven't fixed it. My jet ski sunk and a lot of my electrical components got wet with salt water. My jet ski turns on. I took it to the water but it only ran like at 3-5 mph. I took it to a mechanic near by and he cleaned the throttle body and replaced 2 coils the jet ski runs a little better but not quite. He checked the fuse box and he said it's all corroded and he didn't have the tools to replace them. He thinks that could be most of the issue because he wobbled the fuses and the make the jet ski fail or not run at all. If after replacing the terminals it still doesn't run I'm gonna have to pay a sea doo dealer near by 180 dollars to diagnose it, but first I want to eliminate the fuse box from the possible problems otherwise they dealer is just gonna tell me something about replacing the entire main wire harness which can be expensive (around $1000 if i can't find one new)
So my issue ended up being that I bought the wrong TOPS valve (the wrong one still did it purposes as it should but it was still the wrong one), my top valve did not have the "slot" where you attach the TOPS sensor. Bought a new one with the sensor included in the "slot" in EBAY and the error went away. I had other several issues with my jet ski but I fixed them all myself. My dealer wanted to charge me 1600 dollars and that motivated me to fix it myself lol.
