J jamepc New Member Jul 14, 2013 #1 I know the Quicksilver oil bottle state a 3oz / gal. I also see on these threads that the Mercury Spry Jets take a 50:1 mix, but 128 oz gas : 3oz oil is about a 42:1 mix. Are people using the 50:1 only if pre-mixing? Thanks, James
I know the Quicksilver oil bottle state a 3oz / gal. I also see on these threads that the Mercury Spry Jets take a 50:1 mix, but 128 oz gas : 3oz oil is about a 42:1 mix. Are people using the 50:1 only if pre-mixing? Thanks, James
rjcress Active Member Jul 14, 2013 #2 I've read folks say that 40:1 is right for synthetic, but Tom at Seadoo Engine Shop told me to do 32:1 in my 787
I've read folks say that 40:1 is right for synthetic, but Tom at Seadoo Engine Shop told me to do 32:1 in my 787
Dr Honda Well-Known Member Jul 15, 2013 #3 On a Merc engine... if you are going to run pre-mix... you will run 50:1 So.... that's 2.56 oz of oil per gal of fuel.
On a Merc engine... if you are going to run pre-mix... you will run 50:1 So.... that's 2.56 oz of oil per gal of fuel.
