• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Oil Cooler Question

Status
Not open for further replies.

nesnfred

Member
I am replacing the oil cooler, starboard side, on my 08 230 Wake Edition. I found oil in my coolant. Anyone know the torque spec on the 4 bolts that mount the oil cooler? The oil cooler flush mounts with only two small o rings creating a pressure seal. I would assume the torque specs matter to get the proper seal.
 
Looks like it is 97.3 inch pounds for the oil cooler bolts and 73 inch pounds for the cooling plate plug (make sure you reinsert the plug while coolant is flowing)
 
Status
Not open for further replies.
Back
Top