• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

No spark at the plugs on my 92 bombadier sp

Status
Not open for further replies.

maniac mechanic

New Member
Hello all seadooers,
I have a 1992 seadoo bombadier sp. I am having trouble with it firing off. I have great compression and I have installed an in-line clear fuel filter and I am getting fuel to the carb. I am lacking fire. I am getting voltage to the coil which is about 2 volts or a little higher. I have also Ohmed out the coil which is @ 199.8 Ohms. I am still not getting spark at the plugs. Is there a way to confirm that the coil is bad, or any other info that will tell me why I am not getting fire.
 
no spark

Hi just encountered same no spark problem. have fluxuating voltage to ciol while cranking between 4-11 volts. Fortunately i have 2 1994 gts and swapped coils and now have spark from the other coil. purchased a new one for 160.00$ and good to go!!!! Try meter on out put side of coil see if any reading comming out!!!! I got nothing on the output side. hope this helps danny
 
Last edited by a moderator:
Hey Danny I appreciate your input yet I have found the prob. It happened to be the kill switch from the lanyard. It is intermittentantly killing the spark from happening. Your egar response and insight is well appreciated. If you ever need automotive diagnosis help I willl be more than extactic to pass on any help that I can give, but please contact through my personal e-mail so that this forum stays exactly what it is which is about sea doo's. My addy is maniacmechanic36@yahoo.com Thank you again.
Maniac Mechanic
 
Status
Not open for further replies.
Back
Top