• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

No Beeps when connecting lanyard

Status
Not open for further replies.

97GTS

New Member
I have a 1997 GTS and when I connect the lanyard I get no beeps but starts with no problems. Should I be worried about the beep I think its part of the unit so I would like for it to work, I have heard the there is a part that I might need to replace but I don't know what that part is nor where its located.

Please help
 
pop the cover part for storage.. and look underneath the handle bar area. See if theres anything unplugged.. the pervious owner of mine unplugged the buzzer.
 
I'm really not sure on yours. On mine it is in the dash with all the other stuff. Do you have a shop manual? They sell the buzzers on the site on the parts link. I saw yours for 60 bucks. Try ebay also. :cheers:
 
Thank again

Thanks for all the help I reconnected the plugs and all seems to be working again
 
Last edited by a moderator:
There are some test you can do for that using a multimeter.
To check baffle, remove baffle disconnect PINK/BLACK and PINK wires, check resistance allowing the float to move up and down.
To check gauge, same thing, disconnect gauge and test with multimeter and measure resistance.
Also check the float in the baffle and make sure it floats. Check to see if the magnets need cleaning or maybe fallen off.
 
Status
Not open for further replies.
Back
Top