I have a seadoo challenger x20 with tower. I have to make it under a bridge with little clearance. I think if I fold the tower I can make the clearance. Anyone have a pictures of their tower folded on the season challenger X or X20? This is not removal, this is temporary folding to make it under bridge.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Need picture folded tower x20 challenger
- Thread starter Hawk111
- Start date
- Status
biffdotorg
Active Member
When we folded ours, we had to be prepared to also drop the short legs on the back leg as well, otherwise, they stick up fairly tall.
All you can do is drop it and test/measure. Best tip, get yourself some allen sockets and a socket wrench. It will give you way more torque than a T-wrench or L-wrench. Be sure to tap that socket into place fully as you really don't want to round out that allen head if you start doing this often. We only did it a couple times per year.
Good luck,
All you can do is drop it and test/measure. Best tip, get yourself some allen sockets and a socket wrench. It will give you way more torque than a T-wrench or L-wrench. Be sure to tap that socket into place fully as you really don't want to round out that allen head if you start doing this often. We only did it a couple times per year.
Good luck,
- Status
