Need help with my new Speedster 200

[Norb]

Hey folks,

Im new here, just got my Seadoo speedster 200, 155hp, 2007 boat, and I need to winterize it as the cold has aleady hit us pretty hard. So I have a couple of questions.

1. Where on the boat do I pump the antifreezing liquid, I know it should go into the exhaust but Im not sure where to pump it in?

2. I want to buy a snapon mat kit in gray color but where do I buy it for a reasonable price?

3. The rear seats on the neck has gotten lots of black dirty dots that I cant get of, is there any special soap etc, to be used against that?

Hope you guys can help me out!


Regards

 

[Norb]

Realy no help at a seadoo forum? Geee this I did not espect

 

[kustomkarl]

You have to remember that it is the end of the season here in the states, so we only have limited members popping in now, as season is almost over. On some areas there is snow on the ground. If you read through my link in my avatar on "winterizing" it should help you out.

I'm not sure what a "snap on mat kit", is so I have no idea what it would cost or where to get on.
I use "Purple Stuff" made from 3M, but not sure if it is out side the states.

Karl

 

[Norb]

Thanks but I still dont get where to locate the area for pump the antifreeze when it comes to the exhaustsystem.

 

[kustomkarl]

In the 4- tec winterizing read "Fogging Procedure" Item # 16 . It sums it up. You don't have the super charged model with a inter cooler, but you do have a exhaust manifold and exhaust system.

Karl

 

[Norb]

Sure but only text doesnt help me as I dont know where to look, do someone have a picture where I should push the fluid in?

 

[kustomkarl]

The exhaust manifold has a hose going to it toward the front of the engine...Follow the hose where you connect the garden hose to it on the back of the boat. That goes to the exhaust manifold. That hose is where you pour the anti-freeze into the exhaust manifold. The other hose comes out of the exhaust toward the rear of the engine...there are only 2 cooling lines per engine going to the rear of the boat, as it has inter looping cooling. I added a link to the parts diagram below, maybe this will help you.

The complete procedure is also in the Seadoo Manuals in the "Premium Members" section. If you can't find any pictures you could join for $10.95usd, for the month and download a manual with pictures and a full description of the winterizing procedure in the full manual.

Check #8, that hose is going into the exhaust manifold.#5 is going out after the exhaust...

Click on this parts link for a picture/ diagram.

Seadoo parts manual diagram

I hope this can help you ...
:cheers:
Karl