Need help on removing a rail.

[ProfitOfDoom]

I have a leak in the rear.
Its coming in this rail thing on the side below the bumper.Its like a maybe a stabilizer thing that help keep it in the water? there are 1 on each side in the rear and there about a foot or so long and the one corner is coming up and leaking bad,but I have no idea how to remove it to fix it.
So if someone could help that would be great.
Ill try to post a pic of it to make it easier soon

 

[timmyboy76]

Sounds like the sponsons/stabilizers....look inside the hull, might be bolts/nuts, if rivets, then have to drill out/ or cut the nub from inside and replace, if so, run silicone behind, to help the seal...good luck

 

[JPX]

Should be 10mm nuts or bolts in there somewhere. You'll probably have to remove a bunch of things to get down that far into the bottom of the hull - water/exhaust box, ignition box, some chunks of styrafoam.