2001 GTX RFI , Had blown engine and has been setting a while. I replaced engine. Tried to pump out old gas today using fuel pump.
Info on gauges stuck on time/direction-will not cylcle thru With key on, or by pushing mode button.
New bat. @12.8V
2 Beeps w/key
Engine will turn over
Fuel pump doesnt start, checked voltage at connection and getting 5.6V
Checked back at the MPEM Outside connection 25-26 same voltage.
Checked voltage at fuse: 12 V
Ran 12V over to pump; still doesnt run
Anybody have experience with this problems r can tell me whats going on?
Thanks
Info on gauges stuck on time/direction-will not cylcle thru With key on, or by pushing mode button.
New bat. @12.8V
2 Beeps w/key
Engine will turn over
Fuel pump doesnt start, checked voltage at connection and getting 5.6V
Checked back at the MPEM Outside connection 25-26 same voltage.
Checked voltage at fuse: 12 V
Ran 12V over to pump; still doesnt run
Anybody have experience with this problems r can tell me whats going on?
Thanks
