Loctite 518 removal

[Breathed33p]

Hey im pulling the jet pump from my 98' sea doo GTI, im at the point of getting the venturi out, but the jet cone (?) that focuses the water directly before i reach the venturi will not come off, ive taken all the bolts off and now see that the entire thing is sealed tight with loctite 518. What can i do?

 

[Dennis]

Take a heat gun or hair dryer and heat the seam where the loctite is. This wil soften the loctite and you should be able to tap around the venturi until it pops off. Good luck, DAWG