Karavan trailer rebuild specs

[SHESAH]

Does anyone know the measurement of where the axle should be installed on a reassembly? My nephew helped me revamp a 2008 Karavan trailer for 2008 Seadoo Speedster 150 and painted over the markings of where the axle column was to be placed..

 

[SHESAH]

Does anyone know the measurement of where the axle should be installed on a reassembly? My nephew helped me revamp a 2008 Karavan trailer for 2008 Seadoo Speedster 150 and painted over the markings of where the axle column was to be placed..

 

[jlove]

I have what should be the same trailer and I measured 45.5 in to the center of the axel going from the back of the trailer. give or take about 1/2 in.

 

[SHESAH]

I have what should be the same trailer and I measured 45.5 in to the center of the axel going from the back of the trailer. give or take about 1/2 in.

Jlove, I appreciate you! I'll be at the shop shortly to check how near we get this between your measurement and mine.
I used a clean trailer image below to measure from rear to first bend of the frame and found the rear u-bolt is located at the mid point.

Wasn't sure i'd get any help. My thread was moved all over the place for posting errors as i am new to forum world but I am pleased to see its not as complicated as I thought it might be. I read a lot of the new member intro pages and it helped.

 

[SHESAH]

Hi again, this drawing packet from Karavan may serve future purpose for anyone else with the same question about 2008 trailer.