frankcottnj
Member
I reinstalled my jet pump support and when I took it off the jet pump shoe was still bolted to it. I re-installed with the 3M 5200 and now it cavitates so bad I don't accelerate beyond 4000 rpm. i posted this elsewhere on board but can't find post.Do I have to remove the jet shoe part and re-install but seal it back to the jet pump support at back of ski. The seadoowarehouse site has the exploded view here.
http://partsfinder.onlinemicrofiche...seadoopwc&a=285&b=12&c=0&d=-PROPULSION-SYSTEM
see parts 34 abd 47
How can this cause cavitation. Also drive shaft is lined up well Help!
http://partsfinder.onlinemicrofiche...seadoopwc&a=285&b=12&c=0&d=-PROPULSION-SYSTEM
see parts 34 abd 47
How can this cause cavitation. Also drive shaft is lined up well Help!