-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Injector Oil for a Challenger 110 hp
- Thread starter crf450js
- Start date
- Status
Use High quality low ASH API TC Injector oil.
Do Not use NMMA TC-W, TC-W2 or TC-W3 outboard motor oils or other ash less type 2 cycle oil. Avoid mixing different brands of API TC oil as resulting chemical reaction will cause severe engine damage. Never mix Mineral or synthetics oil together.
Never use fuel containing more than 10 % alcohol,( Methanol or Ethanol) as severe damage will occur. The minimum of 87 octane is recommended for most engines.
In my 1997 Challenger 110 hp single engine787 Model 5603, I used SeaDoo XP-S Synthetic or Synthetic Blend.
Karl
Do Not use NMMA TC-W, TC-W2 or TC-W3 outboard motor oils or other ash less type 2 cycle oil. Avoid mixing different brands of API TC oil as resulting chemical reaction will cause severe engine damage. Never mix Mineral or synthetics oil together.
Never use fuel containing more than 10 % alcohol,( Methanol or Ethanol) as severe damage will occur. The minimum of 87 octane is recommended for most engines.
In my 1997 Challenger 110 hp single engine787 Model 5603, I used SeaDoo XP-S Synthetic or Synthetic Blend.
Karl
- Status
Similar threads
