Info gauge and speedo

[FELUCIFER]

I have a 95 seadoo gtx and the speedo and info center are both dead. Need some help identifying what wires i need to supply power too just to see if info gauge works. Ive checked multiple wires and red/purple wire gets 12 volts at the brain box but purple wire only gets about 10.5 and only if i crank it. Red/purple wire is 12 volts at gauge but cannot find the straight purple at gauge to test it. Need some good help guys

 

[artr]

There is a schematic for your ski in the 95 shop manual. It looks like the info gauge gets 12V on the Red/purple wire and gets Ground on the Black wire which shows a connection to ground inside the electrical box cover. Test the voltage between those 2 wires. If you don't get a 12V reading, check the ground connection on the black wire.
The speedo gets 12V and ground passed on from the info center on the Purple/tan and Black/tan wires.

 

[FELUCIFER]

There is a schematic for your ski in the 95 shop manual. It looks like the info gauge gets 12V on the Red/purple wire and gets Ground on the Black wire which shows a connection to ground inside the electrical box cover. Test the voltage between those 2 wires. If you don't get a 12V reading, check the ground connection on the black wire.
The speedo gets 12V and ground passed on from the info center on the Purple/tan and Black/tan wires.

Ty so much for that info, i will test them tomarro and post my results