Impeller removal tool part #

[saint]

Anyone know the part # for the Impeller removal tool for a 2001 Islandia w/ 240 EFI mercury Jetr drive? Thanks!!

 

[scarfie]

91-850297 --socket Tool

 

[saint]

Thanks for the INFO!!!!!!!!!!!:cheers:

 

[saint]

That is the nut socket, I need the part number for the impeller removing tool!!!!!!!!!!!!!

 

[scarfie]

I'm not sure about the puller bar listed below...it may be for the impeller. I've listed everything i found to do with the impeller.

Maybe someone else will chime in about the puller bar.

91-832093A1 --WRENCH ASSEMBLY, Impeller Shaft
91-832018 --INSTALLER TOOL, Bearing Cup - Pinion And Impeller
91-824871A2 --PRE LOAD KIT, Impeller Shaft
91-824870 BAR, Puller

 

[JPX]

If in doubt, ask this guy - you could even rent the tools from him:
http://www.seadoosource.com/toolrental.html

 

[wingnut1961]

According to the Mercury manual, the impeller slides off the shaft splines after the propeller nut is removed. There is no tool called out. The shaft splines should be lubricated once a season or every 100 hrs.

"While holding impeller shaft (w/Special Tool 91-832093A1), remove impeller nut using Special Tool 91-850297. Impeller nut is a standard right hand thread. Remove impeller."

Maybe a gentle tap from the intake side will get it moving...