impeller help - 97 challenger

[rbh]

Hello, after some research Ive decided to replace the impeller on my challenger with a scat trak swirl 14/22. Does anyone in Canada have a recommended dealer? Im having a difficult time tracking one down that says its listed specifically for my boat. Were all the 140 pumps the same on this era of boat? like the challengers, speedsters or similar pwcs all used the same jet system with different engines? Thanks

 

[Sportster-2001-951C-Stock]

I'm no expert on these by a long shot but I think if they say it will fit inside a Seadoo 140 pump then it will work on all of them. I have noticed some pumps use a shim under the impeller while others don't, not sure what that's about. Of course pitch is the important performance metric so choose wisely!

Also your factory service or owners manual might list the Seadoo part number and the scat track catalog should call out the seadoo number in the cross reference section.

You didn't mention if this is an 1800, this link is to pump parts of the standard Challenger:
http://partsfinder.onlinemicrofiche...=179&b=14&c=0&d=-PROPULSION-SYSTEM---INTERNAL

 

[Minnetonka4me]

If its a 97 it should have a small hub 140mm pump. They did however, in a few instances put a big hub in them as a warranty when the customer bitched about cavitation.