I bought a new computer, had lanyard programmed but still no fire

[mrauction]

I have a 1996 GTS sea doo, I just bought a new computer, had the key programmed at a local dealer and I still have no fire. The lanyard beeps twice then when I go to start the machine I have no fire, is the next step a Ignition coil? I have tried a test light on the plug wires but nothing. I am running out of patience. Thanks Rob

 

[Nate Surveyor]

You said "I am running out of patience."

You will do it several times in your lifetime!

And several of them will be on watercraft!



N

 

[timmyboy76]

2 beeps is good, the keys in synct with mpem....have'ta go thru steps, cut plug wires, recheck all connections, replace if burnt/corroded, install new plugs, check the fuses...etc, then roll us back up...

 

[mrauction]

check went well

I checked everything out and just wondering if the ignition coil is out, the test light is showing power into the coil but none coming out. What do you think?

 

[kustomkarl]

Check the ground coming from the coil to the ground. Its possible it isn't getting a good connection.

Karl