• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

how to change fuses

Status
Not open for further replies.

gr8bbq

New Member
As I mentioned in a previous thread my 2002 RXDI's won't start, no beeping or anything. I am driving out to where the skis are stored and changing the batteries and taking new fuses. According to the manual there are two fuses one 25 amp on the MPEM and a 30 amp in the rear electrical box. Is there a trick to getting to these or is is pretty straight forward?
 
That should be a pretty straight forward process. No big deal about replacing them just make sure the Seadoo isn't on. Also check your manual for informational notes about your fuses. I lost my hard copy but found the electronic version on Seadoo's site. Good luck!
 
I can pretty much say if both skis are doing the same thing it will not be any fuse issues......but could be...never know they might have hooked the pos to neg and neg to pos on both.....but I think both batteries are just that dead.
 
Status
Not open for further replies.
Back
Top