• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Horn and nav light switches

Status
Not open for further replies.

Paisano420

New Member
09utopia se
Horn and nav light switches light up but do not function. Pulled fuzes and they seemed to be all right. .. Trouble shooting pointers please. Thanks in advance.
 
Last edited by a moderator:
First make sure that your horn is getting 12 Vdc before replacing it. Besides fuses, there could be two issues here. The switch could be bad or you are not getting 12 VDC to the switch. It is possible but highly unlikely that your nav. light and horn are both bad at the same time.
 
Swapped fuses and still not working. The switches light up when engaged.. Where is the horn itself located?
 
Horn is located on the starboard side near the helm: Utopia horn.jpg

Break out the voltmeter and see if you have power down at the horn. If you do when you press the button, and the horn doesn't sound, then your horn is bad. If you're not getting power down to the horn when you press the button, then your switch may be bad.

Check the input side of each switch to ensure you have power going into each.
 
Status
Not open for further replies.
Back
Top