• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Help Identify Carbs and Jet Pump

Status
Not open for further replies.

donc1974

New Member
Hi all. I bought a 96 GTX last year and it came with a bunch of extra parts. I have a set of carburetors and a jet pump that are different than those that are on the ski.

In the picture of the carburetors, the carb on the left has some sort of spring loaded device on it that the ski doesn't have. Anybody know what ski(s) these carbs are from?

The extra jet pump I have is all aluminum. The one on the ski is plastic and it looks smaller than the extra one. The bolt pattern where they attach to the hull appear to be the same so I think it might be compatible??

I assume the previous owner had the GTX and another similar ski which was stripped of parts and scrapped. Anybody know what year and model it may have been?

Thanks for the help!
Don.
 

Attachments

  • PXL_20230617_141528690.MP.jpg
    PXL_20230617_141528690.MP.jpg
    396.7 KB · Views: 7
  • PXL_20230616_223846589.MP.jpg
    PXL_20230616_223846589.MP.jpg
    537.7 KB · Views: 7
Looks like a brass 155mm pump from a ski without VTS and the carbs are from a 951. I'm thinking a 98 or 99 GTXL?
 
Thank you WhiskeyD! I looked at the parts schematics for a 98 GTXL and they match the extra parts I have.

Assuming it fits, could I put the larger jet pump on my 96 GTX? Is the 787 up to the task of spinning the larger pump? I'm just wondering if I should keep the larger pump as a spare or find it a new home.

Don.
 
Status
Not open for further replies.
Back
Top