Hardwick63
New Member
Just finished a rebuild on a 2000 GTX, as we got the seadoo in boxes we never had a chance to find out what else is wrong with it.
Basically it will only start if you disconnect and reconnect the power to the MPEM, it beeps twice when reconnected and fires up and runs well, switch it off and you have to disconnect and reconnect the power again. There was a switch that the previous owner had rigged up (badly) so there was obviously a previous problem. Also I have no display on the gauges and no diagnostic mode from the start/stop button. Any help and advice would be appreciated. Thanks Colin, BC
Basically it will only start if you disconnect and reconnect the power to the MPEM, it beeps twice when reconnected and fires up and runs well, switch it off and you have to disconnect and reconnect the power again. There was a switch that the previous owner had rigged up (badly) so there was obviously a previous problem. Also I have no display on the gauges and no diagnostic mode from the start/stop button. Any help and advice would be appreciated. Thanks Colin, BC
