Hi all. New to group. Have a used 2000 seedoo RX that fouls plugs very quickly. Dealer says typical 2 cycle machine. Have owned it for 1 year. I am an ASE certified automobile tech and have been for 35yrs. So I do not believe dealer we got it from. So what should I be looking for. Plugs are new OE NGK's and gapped @.043". Additionally is there a way to scan machine without factory tool. Thanks to all. mramsh.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
Fouled plugs
- Thread starter mrsmah
- Start date
- Status
Welcome to the seadoo forum mrsmah. Here is the specs on the plugs.
Spark Plugs for 2 stroke NGK BR8ES Gap/ 0.5-0.6mm or .020-.024in.
The equipment needed to check the MPEM,(Multipurpose Electronic Module) is a dealer only item.
Re gap the plugs and see what it does.
Karl
Spark Plugs for 2 stroke NGK BR8ES Gap/ 0.5-0.6mm or .020-.024in.
The equipment needed to check the MPEM,(Multipurpose Electronic Module) is a dealer only item.
Re gap the plugs and see what it does.
Karl
- Status
Similar threads
- Locked
