• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Coolant on my 2011 Speedster 150 at minimum?

Status
Not open for further replies.

cheappc

Active Member
Before taking the boat out yesterday I was performing a pre-ride inspection and I noticed my coolant level is at it's "minimum" I could have sworn it was at full a year ago.

Do I have to remove all the coolant, or can I just add coolant to it? Also what kind.. Thanks in advance..
 
the coolant is a 50/50, i would just top it up with water and keep an eye on it.
change the coolant at end of the year or when ever you want, that way you know the brand your using. (most people say don't mix your brands of coolant).
the coolant drain plug is the hex screw at the end of the ride plate.
 
the coolant is a 50/50, i would just top it up with water and keep an eye on it.
change the coolant at end of the year or when ever you want, that way you know the brand your using. (most people say don't mix your brands of coolant).
the coolant drain plug is the hex screw at the end of the ride plate.

Thanks, you mean just add water? Nice like a car? I was going to take it to the dealer but it's so minor, I did the 10 hour breakin they changed oil and so forth, now I'm at 31 hours so it needs oil change, coolant, so forth.. And I definitely need a new battery mines always drains after not using it for a while.

Thanks again
 
Status
Not open for further replies.
Back
Top