Carb setting

[95sportster]

I know this has already been discussed but i have been searching for a few days and couldn't find the answer.


How any turns out should my low speed adjuster screw be set to?


I came across a new old stock set of carbs for my boat for cheaper than rebuilding my current ones. I figured it wouldn't hurt to have a spare. In case it's pertinent, I also went through the new ones and have the pop off set at 20 and 21psi (manual says 17-21).

Edit: this is a 95 sportster with the 657x.

 

[Coastiejoe]

Let me make it clear that I am NOT an expert on Seadoo carbs.

That said, I read here that it is 1 and 1/2 turns out.

 

[95sportster]

Thanks. They fired right up after the swap.

 

[Coastiejoe]

That's cool. Glad it worked out for you.