hey i know my carbs are not working properly prob just a bad needle and seat but would like some info on who i can send these to that is very reputable and wont charge me for a full rebuild when it doesnt need it or if it does not charge me an arm and a leg. my engine keeps getting flooded and wouldnt start the last time i tried to take it out and even with cranking it while the plugs were out and clearing Alot of gas out still wouldnt start, but finally took the carbs completly off blew out the cylinders again it fired right up. i dont have a pop off pressure tester and i just want it done right one time so i dont have to deal with this issue and more. i have dual carbs from a 787 from my 98 speedster.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
carb rebuild who can i send them to?
- Thread starter cenzo4dub
- Start date
- Status
Spimothy Leary
Well-Known Member
ditto's, good choice's there
ok well i decided to do it my self just got a quick question my boat is completly stock and my rebuild kit came with the shiny silver spring and the gold spring obviously these require to have different pop off pressures. i also ordered two new needle valves and seats size 1.5 which is what was in there. my carbs had the shiny silver spring in there. now should i just put in the silver springs and have a popoff of 32 or put in the gold and have a popoff of 65 or would that have the same results in the end anyway. BTW i got those numbers from the mikuni chart. any help would be appreciated
- Status
Similar threads
