Adding Auto Float Switch to 1996 Speedster Bilge Pump

[treimche]

I'm installing a Rule 37A float switch, which looks super simple. Just basically mount it, then wire it into the positive side of the existing bilge pump. I am wondering what it takes to make it so I can have automatic and manual control for the bilge pump. Looks like maybe a 3 position switch could do it? Is there a nice clean way to add an OEM looking switch instead of having to cut a new hole or mount a new toggle switch somewhere?

 

[treimche]

Looks like I should have just Google'd first before posting, its been a long day. I'll just leave this here for future reference anyway: How to wire a bilge pump | ON-OFF bilge switch | New Wire Marine For my purpose, I'll be wiring the float switch in parallel so I can have manual and automatic control at all times. Didn't realize that was possible but it makes sense now!

 

[jts32]

Be aware that most traditional float switches don't work on Seadoo boats until the water level has already submerged the starter.

 

[treimche]

Be aware that most traditional float switches don't work on Seadoo boats until the water level has already submerged the starter.

Thanks for the warning. I will definitely try and mount it as low as possible.