97 seafood challenger 1800 cutting out

[Dirty]

Ok so I installed 2 new motors and went ahead and installed oil block off plates and am now running premix. Anyway I took it out today for a test run.. And it does great for the first 20-30 min then the motors take turns bogging down and sometimes cutting out all together. I'm thinking the fuel sending unit may be going out but figured I'd get a second opinion to see if it could be anything else.

 

[Dr Honda]

If it was in the fuel pickup... then both engines would shut down together. (just running out of fuel)


Did you rebuild the carbs?


When you pulled the oil pumps... did you still supply oil down to the rotary gears?

 

[Dirty]

To answer your questions.. Yes had the carbs rebuilt about 2 months ago. And yes still have oil supplied to the motor. Just removed the oil pumps, installed block off plates, and blocked off the lines that when to the pumps.

But I got it all straightened out.. Not sure witch it was that fixed it... But I replaced both fuel filters and I changed the adjustment on the rave valves.. Took it out without any problems today.